Honda FourTrax Rancher TRX420FA5 2019, Owner'S Manual

Page: 46 / 278

Instruments & Controls 36
Controls & Features
The start button (1) is used for starting the engine. Pushing the
button in starts the engine. See
Starting Procedure , page 74.
When the start button is pushed, the starter motor will crank the
engine. The starter motor will not operate if the engine stop switch
is in the OFF (
r
) position when the start button is pushed.
The engine stop switch (2) is used to stop the engine in an
emergency. To operate, slide the switch to the OFF (
r
) position. The
switch must be in the RUN (
e
) position to start the engine, and it
should normally remain in the RUN (
e
) position even when the
engine is OFF.
If your ATV is stopped with the ignition switch ON (
q
) and the engine
stop switch OFF (
r
), the battery will discharge. Turn the ignition
switch to OFF (
w
) to prevent battery discharge.
Start Button
o
Engine Stop Switch
e r
LEFT HANDLEBAR
(1)
(2)
(1) start button
(2) engine stop switch
o
START
r
OFF
e
RUN
19 TRX420FA5 FA6-31HR7640.book Page 36 Tuesday, May 29, 2018 10:11 AM