Honda FourTrax Rancher TRX420FA5 2019, Owner'S Manual

Page: 37 / 278

Instruments & Controls 27
Indicators & Displays
The digital clock (1) displays hours and minutes with the clock mark
(2), when the ignition switch is ON (
q
).
To adjust the time, proceed as follows:
1. Turn the ignition switch ON (
q
) to display the clock (page 21).
2. Press and hold the mode button (3) until the display start
blinking.
3. To advance the display 1 minute at a time, press and release the
mode button for 0.5 seconds.
Press and hold the mode button for more than 0.5 seconds, the
display will begin advancing fast.
4. Release the mode button when the display reaches the desired
time.
5. To set the clock, press and release the mode button for less than
0.5 seconds.
The clock can also be set by turning the ignition switch off and
then on.
After the battery is reconnected (page 186), check the clock.
Readjust the clock if necessary.
Digital Clock
(3) mode button
(1)
(2)
(3)
(1) digital clock
(2) clock mark
19 TRX420FA5 FA6-31HR7640.book Page 27 Tuesday, May 29, 2018 10:11 AM