Honda FourTrax Rancher TRX420FA5 2019, Owner'S Manual

Page: 142 / 278

Servicing Your Honda 132
Engine Oil & Filter
Install a New Engine Oil Filter:
Place shop towels under the oil filter cover because oil will flow out.
1. Remove the oil filter cover (1) and O-ring (2) by removing the
bolts (3). Let the remaining oil drain out. Discard the oil filter (4)
in an approved manner (page 202).
2. Apply engine oil to a new O-ring and install it to the oil filter
cover. Then install a new oil filter. Use only the Honda Genuine
oil filter or a filter of equivalent quality specified for your model.
Using the wrong Honda filter or a non-Honda filter which is not
of equivalent quality may cause engine damage.
3. Install a new oil filter with the rubber seal (5) facing inward,
toward the engine. Make sure the spring (6) and the “OUT-SIDE
(TOWARDS FILTER COVER)” mark (7) faces away from the
engine, toward the oil filter cover.
NOTICE
Improper installation of the oil filter can cause serious engine
damage.
(3)
(2)
(1)
(5)
(4)
(7)
RIGHT SIDE
(6)
(1) oil filter cover
(3) bolts
(5) rubber seal
(6) spring
(4) oil filter
(2) O-ring
(7) “OUT-SIDE (TOWARDS
FILTER COVER)” mark
19 TRX420FA5 FA6-31HR7640.book Page 132 Tuesday, May 29, 2018 10:11 AM