Honda FourTrax Rancher TRX420FA5 2019, Owner'S Manual

Page: 148 / 278

Servicing Your Honda 138
Front Final Gear Oil
1. Park your ATV on a firm, level surface.
2. Place an oil drain pan under the oil drain bolt (1).
3. Remove the oil fill cap (2), O-ring, drain bolt and sealing washer.
4. After the oil has completely drained, reinstall the drain bolt with
a new sealing washer and tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
5. Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 202).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
6. Fill the front final gear with the recommended oil.
7.1 US oz (210 cm 3 )
Make sure the oil level is at the lower edge of the oil fill inspection
hole (3).
7. Coat a new O-ring with grease and install it into the fill cap
groove and tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
(2)
(1) oil drain bolt
(3)
FRONT
(2) oil fill cap
(3) oil fill inspection hole
(1)
19 TRX420FA5 FA6-31HR7640.book Page 138 Tuesday, May 29, 2018 10:11 AM