479
uu
Maintenance Under the Hood
u
Engine Coolant
Main
tenan
ce
2.
If the coolant level is below the
MIN
mark,
add the specified coolant until it reaches
the
MAX
mark.
3.
Inspect the cooling system for leaks.
1. Make sure the engine and radiator are
cool.
2.
Turn the radiator cap counterclockwise and
relieve any pressure in the coolant system.
Do not push the cap down when turning.
3.
Push down and turn the radiator cap
counterclockwise to remove it.
4.
The coolant level should be up to the base
of the filler neck. Add coolant if it is low.
5.
Put the radiator cap back on, and tighten it
fully.
6.
Pour coolant into the reserve tank until it
reaches the
MAX
mark. Put the cap back
on the reserve tank.
■
Radiator
1
Radiator
NOTICE
Pour the fluid slowly and carefully so you do not spill
any. Clean up any spills immediately; they can
damage components in the engine compartment.
3
WARNING
Removing the radiator cap while the
engine is hot can cause the coolant to spray
out, seriously scalding you.
Always let the engine and radiator cool
down before removing the radiator cap.
4-cylinder models
6-cylinder models
Radiator Cap
Radiator Cap
14 CROSSTOUR-31TP66400.book 479 ページ 2013年8月5日 月曜日 午後2時59分
Summary of Contents for Crosstour 2014
Page 28: ...26 14 CROSSTOUR 31TP66400 book 26...
Page 70: ...68 14 CROSSTOUR 31TP66400 book 68...