Honda Crosstour 2014, Owner'S Manual

Page: 407 / 571

405
Features
Compass *
When you turn the ignition switch to ON
( w
, the compass self-calibrates, and the
compass display appears.
Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
1. Turn the ignition switch to ON
( w
.
2. Press and hold the MENU button until the
display shows the compass setting menu
list.
3. Rotate to select CALIBRATION , then
press .
4. When the display changes to PUSH CAL
START , press .
5. Drive the vehicle slowly in two circles.
u The compass starts to show a direction
after the calibration. The
CAL indicator
goes off.
1 Compass *
Compass operation can be affected under the
following conditions:
•
Driving near power lines or stations
•
Crossing a bridge
•
Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
•
When accessories such as antennas and roof racks
are mounted by magnets
Canadian models
Models without audio touch screen
1 Compass Calibration
Calibrate the compass in an open area.
While setting the compass:
•
The RETURN button returns to the previous screen.
•
The MENU button cancels the setting mode.
These indications are used to show how to operate
the selector knob.
Rotate
to select.
Press to enter.
Compass Setting Menu Items
* Not available on all models
14 CROSSTOUR-31TP66400.book 405 ページ ２０１３年８月５日 月曜日 午後２時５９分