484
Main
tenan
ce
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.
1.
Remove the engine coolant reservoir.
2.
Push the tab to remove the coupler.
3.
Rotate the old bulb to the left to remove.
4.
Insert a new bulb into the headlight
assembly and turn it to the right.
5.
Insert the coupler into the connector of the
bulb.
High beam headlight: 60W (HB3 for halogen bulb type)
Low beam headlight: 55W (H11 for halogen bulb type)
■
High Beam Headlight
1
Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the cargo area or tow a trailer, have
the aiming readjusted at a dealer or by a qualified
technician.
When replacing a halogen bulb, handle it by its base,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
The exterior lights’ inside lenses (headlights, brake
lights, etc.) may fog temporarily after a car wash or
while driving in the rain. This does not impact the
exterior light function.
However, if you see a large amount of water or ice
accumulated inside the lenses, have your vehicle
inspected by a dealer.
Passenger side
Tab
Coupler
Bulb
14 CROSSTOUR-31TP66400.book 484 ページ ２０１３年８月５日 月曜日 午後２時５９分
Summary of Contents for Crosstour 2014
Page 28: ...26 14 CROSSTOUR 31TP66400 book 26...
Page 70: ...68 14 CROSSTOUR 31TP66400 book 68...
