407
Features
Compass
*
When you turn the ignition switch to ON
(
w
*1
, the compass self-calibrates, and the
compass display appears.
Compass Calibration
If the compass indicates the wrong direction, or the
CAL
indicator blinks, you need
to manually calibrate the system.
1.
Turn the ignition switch to ON
(
w
*1
.
2.
On the top screen of any audio source,
press and hold
for 5 seconds.
u
The display switches to the
Compass
Settings
screen.
3.
Rotate
to
select
Calibration
, then press
.
4.
When the display changes to
Calibration
Start
, press
.
5.
Drive the vehicle slowly in two circles.
u
The compass starts to show a direction
after the calibration. The
CAL
indicator
goes off.
*1: Models with the smart entry system have an
ENGINE START/STOP
button instead of an
ignition switch.
Models with audio touch screen
1
Compass
*
Compass operation can be affected under the
following conditions:
•
Driving near power lines or stations
•
Crossing a bridge
•
Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
•
When accessories such as antennas and roof racks
are mounted by magnets
1
Compass Calibration
Calibrate the compass in an open area.
While setting the compass, press the
BACK
button to
cancel the setting mode and return to the previous
screen.
* Not available on all models
14 CROSSTOUR-31TP66400.book 407 ページ ２０１３年８月５日 月曜日 午後２時５９分
Summary of Contents for Crosstour 2014
Page 28: ...26 14 CROSSTOUR 31TP66400 book 26...
Page 70: ...68 14 CROSSTOUR 31TP66400 book 68...
