Honda Clarity 2017 Electric, Owner'S Manual

Page: 388 / 543

uu When Driving u Adaptive Cruise Control (ACC) with Low Speed Follow (LSF)
386
Driving
Press and hold the (interval) button for one
second.
Cruise Mode Selected appears on
the driver information interface for two
seconds, and then the mode switches to
Cruise.
To switch back to ACC with LSF, press and
hold the button again for one second.
ACC
Mode Selected appears on the driver
information interface for two seconds.
■
When to use
Desired speed in a range above roughly 25 mph (40 km/h) ~.
Take your foot off the pedal and press the –/SET button when you reach the desired
speed.
The moment you release the
–/SET button, the set speed is fixed, and cruise control
begins. The CRUISE CONTROL indicator comes on.
Each time you press the RES/+ or –/SET button, the vehicle speed is increased or
decreased by about 1 mph (1.6 km/h).
If you keep the
RES/+ or –/SET button pressed, the vehicle speed increases or
decreases until you release it. This speed is then set.
■
To Switch ACC with LSF to Cruise Control
1 To Switch ACC with LSF to Cruise Control
Always be aware which mode you are in. When you
are driving in Cruise mode, the system will not assist
you to maintain a following-interval from a vehicle
ahead of you.
You can switch the displayed set speed
measurements on the driver information interface
between mph and km/h.
2 Gauges P. 114
ACC with
LSF ON Cruise
Control ON
■
To Set the Vehicle Speed
■
To Adjust the Vehicle Speed
17 CLARITY BEV CSS-31TRV6000.book 386 ページ ２０１７年４月１４日 金曜日 午前１１時８分