Honda Clarity 2017 Electric, Owner'S Manual

Page: 122 / 543

uu Gauges and Driver Information Interface u Driver Information Interface
120
In
strum
e
nt Pa
nel
Shows the total number of miles or kilometers that your vehicle has accumulated.
Shows the total number of miles or kilometers driven since the last reset. Meters A
and B can be used to measure two separate trips.
■
Resetting a trip meter
To reset a trip meter, display it, then press and hold the TRIP button. The trip meter
is reset to 0.0 .
Shows the outside temperature in Fahrenheit.
■
Adjusting the outside temperature display
Adjust the temperature reading up to ± 5°F if the temperature reading seems
incorrect.
Shows the estimated average energy consumption of each trip meter in miles/kWh
or km/kWh. The display is updated at set intervals. When a trip meter is reset, the
average energy consumption is also reset.
■
Odometer
■
Trip Meter
■
Outside Temperature
■
Average Energy Consumption
1 Trip Meter
Switch between trip meter A and trip meter B by
pressing the
TRIP button.
1 Outside Temperature
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
Use the audio/information screen’s customized
features to correct the temperature.
2 Customized Features P. 280
1 Average Energy Consumption
You can change when to reset the average energy
consumption.
2 Customized Features P. 280
17 CLARITY BEV CSS-31TRV6000.book 120 ページ ２０１７年４月１４日 金曜日 午前１１時８分