Honda Civic Hybrid Manual Download Page 41

Page: 41 / 333

Together, airbags and

seat belts provide the best
protection.

Tampering could cause

the airbags and automatic seat belt
tensioners to deploy, possibly
causing very serious injury.

If water or another liquid

soaks into the seat-back, it can
prevent the side airbag system
from working properly.

Improperly replacing

or covering front seat-back covers
can prevent your side airbags from
inflating during a side impact.

Do not attempt to deactivate your
airbags.

Do not tamper with airbag and
automatic seat belt tensioner
components or wiring f or any
reason.

Do not expose the f ront seat-backs
to liquid.

Do not cover or replace f ront seat-
back covers without consulting
your dealer.

Additional Saf ety Precautions

Additional Information About Your Airbags

Driver and Passenger Saf ety

07/08/22 17:19:05 32SND620_041

Summary of Contents for Civic Hybrid














































































































































































































































































































































Search results

Summary of Contents for Civic Hybrid

Reviews:

Related manuals for Civic Hybrid

Brands by name

Popular brands

Honda Civic Hybrid, Manual

Search results

Summary of Contents for Civic Hybrid

Reviews:

Related manuals for Civic Hybrid

Brands by name

Popular brands