Honda Civic Hybrid Manual Download Page 194

Page: 194 / 333

Park with the left side closest to
the service station pump.

Open the fuel fill door by pushing
on the handle on the outside of the
driver’s seat.

The fuel fill cap is attached to the
fuel filler with a tether to avoid
loosing the cap.

Remove the fuel fill cap slowly.
You may hear a hissing sound as
pressure inside the tank escapes.
Place the cap in the holder on the
fuel fill door.

CONTINUED

Ref ueling

Service Station Procedures

Bef ore Driving

189

Petrol is highly flammable
and explosive. You can be
burned or seriously injured
when handling fuel.

Stop the engine, and keep
heat, sparks, and flame
away.
Handle fuel only outdoors.
Wipe up spills immediately.

Push

FUEL FILL CAP

TETHER

HOLDER

07/08/22 17:39:38 32SND620_194

Summary of Contents for Civic Hybrid














































































































































































































































































































































Search results

Summary of Contents for Civic Hybrid

Reviews:

Related manuals for Civic Hybrid

Brands by name

Popular brands

Honda Civic Hybrid, Manual

Search results

Summary of Contents for Civic Hybrid

Reviews:

Related manuals for Civic Hybrid

Brands by name

Popular brands