Honda Civic del Sol 1993 Owner'S Manual Download Page 85

Page: 85 / 182

Automatic Transmission

This display is on the instrument
panel. It shows you the position of
the shift lever.

The shift lever has seven positions.
It must be in Park or Neutral to
start the engine. When you are
stopped in D4, D3, 2,1 or R, press

firmly on the brake pedal and keep
your foot off the accelerator pedal.

Park (P)

— This position mechani-

cally locks the transmission. Use
Park whenever you are turning off
or starting the engine. To shift out
of Park, you must press on the

brake pedal and have your foot off
the accelerator pedal. Press the
release button on the side of the
shift lever to move it.

You must also press the release
button to shift into Park. To avoid

transmission damage, come to a
complete stop before shifting into
Park. The shift lever must be in
Park before you can remove the

key from the ignition switch.

If you have done all of the above
and still cannot move the lever out
of Park, see Shift Lock Release on
page

Driving

SHIFT LEVER

CONTINUED

Summary of Contents for Civic del Sol 1993























































































































































































Search results

Summary of Contents for Civic del Sol 1993

Reviews:

Related manuals for Civic del Sol 1993

Brands by name

Popular brands

Honda Civic del Sol 1993, Owner'S Manual

Search results

Summary of Contents for Civic del Sol 1993

Reviews:

Related manuals for Civic del Sol 1993

Brands by name

Popular brands