Honda Civic del Sol 1993 Owner'S Manual Download Page 144

Page: 144 / 182

Changing a Flat Tire

If you have a flat tire while driving,
stop in a safe place to change it.
Stopping in traffic or on the shoul-

der of a busy road is dangerous.
Drive slowly along the shoulder

until you get to an exit or an area to
stop that is far away from the traf-

fic lanes.

1. Park the car on firm, level

ground away from traffic. Turn
on the hazard warning lights and
turn the ignition to LOCK (0).

2. Put the transmission in Park

(automatic) or Reverse (manual).
Set the parking brake.

3. Open the trunk and lift up the

roof holder.

Raise the trunk floor by lifting

up on the back edge.

4. Take the tool kit out of the trunk.

5. Unscrew the wing bolt and take

the spare tire out of its well.

CONTINUED

Taking Care of the Unexpected

ROOF HOLDER SPARE TIRE

TOOL KIT

JACK

The car can easily roll off the

jack, seriously injuring anyone
underneath.

Follow the directions for chang-
ing a tire exactly, and never
get under the car when it is

supported only by the jack.

Summary of Contents for Civic del Sol 1993























































































































































































Search results

Summary of Contents for Civic del Sol 1993

Reviews:

Related manuals for Civic del Sol 1993

Brands by name

Popular brands

Honda Civic del Sol 1993, Owner'S Manual

Search results

Summary of Contents for Civic del Sol 1993

Reviews:

Related manuals for Civic del Sol 1993

Brands by name

Popular brands