Honda Civic del Sol 1993 Owner'S Manual Download Page 47

Page: 47 / 182

Keys and Locks, Seat Adjustments

To open either rear locking
compartment, put the key in the
lock, turn it counterclockwise and

lift the lid up.
Push the lid to close. Turn the key
clockwise to lock the box.

Adjust the seat before you start

driving.

To adjust the seat forward and
backward, pull up on the lever
under the seat cushion's front edge.

Move the seat to the desired
position and release the lever. Try
to move the seat to make sure it is

locked in position.

To change the angle of the seat-

back, pull up on the lever on the
outside of the seat bottom. Move
the seat-back to the desired
position and release the lever. Let

the seat-back latch in the new
position.

Instruments and Controls

Rear Locking Compartment

Seat Adjustments

Summary of Contents for Civic del Sol 1993























































































































































































Search results

Summary of Contents for Civic del Sol 1993

Reviews:

Related manuals for Civic del Sol 1993

Brands by name

Popular brands

Honda Civic del Sol 1993, Owner'S Manual

Search results

Summary of Contents for Civic del Sol 1993

Reviews:

Related manuals for Civic del Sol 1993

Brands by name

Popular brands