Honda Civic del Sol 1993 Owner'S Manual Download Page 143 | Manualshive

Page: 143 / 182

background image

Compact Spare Tire

Your car has a compact spare tire
that takes up less space. Use this
spare tire as a temporary replace-

ment only. Get your regular tire
repaired or replaced and put back
on your car as soon as you can.

Check the inflation pressure of the
compact spare tire every time you
check the other tires. It should be

inflated to:
415 kPa (4.15 kg/cm

2

, 60 psi)

Follow these precautions whenever
you are using the compact spare
tire:

Do not exceed 50 mph (80 km/h)
under any circumstances.

This tire gives a harsher ride and
less traction on some road sur-
faces than the regular tire. Use

greater caution while driving on
this tire.

Do not mount snow chains on the
compact spare.

The wheel of the compact spare
tire is designed especially to fit
your car. Do not use your spare
tire on another car unless it is the
same make and model.

The compact spare tire has a
shorter tread life than a regular
tire. Replace it when you can see
the tread wear indicator bars. The

replacement should be the same
size and design tire, mounted on
the same wheel. The compact spare
tire is not designed to be mounted
on a regular wheel, and the com-

pact wheel is not designed for
mounting a regular tire.

Taking Care of the Unexpected

TREAD WEAR

INDICATOR
BAR

INDICATOR
LOCATION
MARK

«
...
141
142
143
144
145
...
»

Summary of Contents for Civic del Sol 1993























































































































































































Reviews:

No comments

Related manuals for Civic del Sol 1993

Brand: Honda Pages: 73

Brand: TrailFX Pages: 6

Brand: Lexus Pages: 369

Brand: Mountain Top Pages: 12

Brand: muth Pages: 10

Brand: Whispbar Pages: 85

Brand: BMW Pages: 189

Brand: TATA Motors Pages: 166

Brand: Advanced Diagnostics Pages: 10

Brand: Cadillac Pages: 19

Brand: Brink Pages: 21

Brand: Edelbrock Pages: 4

Brand: Ford Pages: 4378

Brand: Toyota Pages: 549

Brand: Ford Pages: 292

Brand: Ratio Electric Pages: 16

Brand: Chevrolet Pages: 88

2002 Silverado 1500 Pickup

Brand: Chevrolet Pages: 497

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands