6.
Remove the front axle nut, front axle
shaft, front wheel and side collars.
u
Avoid getting grease, oil, or dirt on the
disc or pad surfaces.
u
Do not pull the brake lever while the
front wheel is removed.
Installation
1.
Attach the side collars to the front wheel.
2.
Position the front wheel between the fork
legs and insert the front axle shaft from
the left side, through the left fork leg and
wheel hub.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
3.
Tighten the front axle nut.
Torque:
59 N·m (6.0 kgf·m, 44 lbf·ft)
4.
Tighten the axle pinch bolt on both sides.
Torque:
24 N·m (2.4 kgf·m, 18 lbf·ft)
20171012170126_32K98B000_eng_BOOK Page 111 Thursday, October 12 2017 17:09:26 JST
Tyre Puncture
u
Removing Wheels
Troubleshooting
108
Side collar
Front axle shaft
Axle pinch
bolt
