Changing Engine Oil
Changing the oil requires special tools. We
recommend that you have your motorcycle
serviced by your dealer.
1.
If the engine is cold, idle the engine for 3
to 5 minutes.
2.
Turn the ignition switch to the (Off)
position and wait for 2 to 3 minutes.
3.
Place your motorcycle on a firm, level
surface.
4.
Place a drain pan under the drain bolt.
5.
Remove the oil fill cap/dipstick, drain bolt
and sealing washer to drain the oil.
u
Discard the oil at an approved
recycling centre.
6.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque
: 25 N·m (2.5 kgf·m, 18 lbf·ft)
7.
Fill the crankcase with the recommended
oil (
P. 131) and install the oil fill
cap/dipstick.
Required oil
When changing oil:
1.0 L (1.1 US qt, 0.9 Imp qt)
8.
Check the oil level.
9.
Check that there are no oil leaks.
20171012170126_32K98B000_eng_BOOK Page 86 Thursday, October 12 2017 17:09:26 JST
Engine Oil
u
Changing Engine Oil
Maintenance
83
Sealing washer
Drain bolt
