Setting Mode A
If the buttons are not pressed for about 30
seconds, the control is automatically switched
from the setting mode to the ordinary
display.
If the buttons are not pressed for about 30
seconds, items in the process of being set will
be discarded and only items where settings
have been finalised will be applied. Only if
the ignition switch is turned to the (Off)
position will items in the process of being set
and those that are finalised be applied.
1 Clock setting:
a
Turn the ignition switch to the (On)
position.
b
Select the odometer, tripmeter A or
c
Press and hold the
SEL
and the
SET
buttons until the hour digits start flashing.
d
Press the
SEL
button until the desired hour
is displayed.
u
Press and hold the
SEL
button to
advance the hour fast.
20171012170126_32K98B000_eng_BOOK Page 33 Thursday, October 12 2017 17:09:26 JST
Operation Guide
30
Instruments
(Continued)
