63
4
Essential Individual Components
RIGHT HANDLEBAR CONTROLS
Engine Stop Switch
The engine stop switch (1) is next to the
throttle grip. When the switch is in the
(RUN) position, the engine will operate. When
the switch is in the (OFF) position, the
engine will not operate. This switch is
intended primarily as a safety or emergency
switch and should normally remain in the
(RUN) position.
If your motorcycle is stopped with the ignition
switch ON and the engine stop switch
(OFF), the headlight and taillights will remain
on, resulting in battery discharge.
Start Button
The start button (2) is below the engine stop
switch.
When the start button is pressed, the starter
motor cranks the engine. If the engine stop
switch is in the (OFF) position, the starter
motor will not operate.
When the start button is pressed,the headlight
will automatically go out, but the taillight will
stay on.
See page 76 for the starting procedure.
(1) Engine stop switch
(2) Start button
(1)
(2)
Summary of Contents for CB1000R
Page 10: ......
