Installation:
1. Install the side collars into the left and right
side wheel hub.
2. Position the front wheel between the fork
legs and insert the front axle shaft from the
left side through the left fork leg and wheel
hub.
3. Align the index line (1) of the front axle
shaft with the surface (2) of fork leg.
4. Tighten the axle pinch bolt on the left fork
leg to the specified torque:
22 N•m (2,25 kgf•m,16 lbf•ft)
5. Tighten the axle bolt (5) to the specified
torque:
59 N•m (6,0 kgf•m, 43 lbf•ft)
6. Install the right and left caliper assemblies
to the fork legs and tighten the new fixing
bolts to the specified torque:
45 N•m (4,6 kgf•m, 33 lbf•ft)
To avoid damaging the brake pads, carefully
fit the brake disks between the pads.
7. Operate the front brake and pump the fork
several times.
Check for free wheel rotation after the
brake is released. Recheck the wheel if the
brake drags or the wheel does not rotate
freely.
(2)
(1) Index line
(2) Surface
(1)
Maintenance
7
117
Summary of Contents for CB1000R
Page 10: ......
