37
3
Major Components
Rear Suspension
Rebound Damping
To reduce (SOFT):
Turn the adjuster counterclockwise toward
SOFT for a light load and smooth road
condition.
To increase
(HARD):
Turn the adjuster clockwise toward HARD for
a firmer ride and rough road condition.
To adjust the adjuster to the standard
position, proceed as follows:
1. Turn the damping adjuster (1) clockwise
until it will no longer turn (lightly seats). This
is the full hard setting.
2. The adjuster is set in the standard position
when the adjuster is turned
counterclockwise approximately 1,5 turns
so that its punch mark (2) aligns with the
reference punch mark (3).
(1) Damping adjuster
(2) Punch mark
(3) Reference punch mark
(1)
(2)
(3)
Summary of Contents for CB1000R
Page 10: ......
