To change the bulb on the driver’s
side, start the engine, turn the
steering wheel all the way to the
right, then turn off the engine. To
change the bulb on the passenger’s
side, turn the steering wheel to the
left.
Reinstall the inner fender cover.
Then reinstall the holding clips,
and lock them in place by pushing
on their centers.
Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the headlights to test the
new bulb.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb by turning it one-
quarter turn counterclockwise.
5.
6.
1.
7.
8.
3.
4.
Lights
Replacing the Front Side Marker/
Parking/Turn Signal Light Bulb
304
TAB
HOLDING CLIP
SOCKET
09/07/02 17:19:36 31SNA640_309
Summary of Contents for 2010 Civic GX
Page 57: ...54 09 07 02 16 35 09 31SNA640_059 I n f o r ma t i o nP r o v i d e db y...
Page 239: ...236 09 07 02 17 07 47 31SNA640_241 I n f o r ma t i o nP r o v i d e db y...
Page 353: ...350 09 07 02 17 27 34 31SNA640_355 I n f o r ma t i o nP r o v i d e db y...
Page 371: ...368 09 07 02 17 30 38 31SNA640_373 I n f o r ma t i o nP r o v i d e db y...
