When not using the LATCH system,
all child seats must be secured to the
vehicle with the lap part of a lap/
shoulder belt.
With the child seat in the desired
seating position, route the belt
through the child seat according
to the seat maker’s instructions,
then insert the latch plate into the
buckle and remove any slack from
the lap portion of the belt.
To activate the lockable retractor,
slowly pull the shoulder part of the
belt all the way out until it stops,
then let the belt feed back into the
retractor.
After the belt has retracted, tug on
it. If the belt is locked, you will not
be able to pull it out. If you can pull
the belt out, it is not locked, and
you will need to repeat these steps.
In addition, the lap/shoulder belts in
all seating positions except the
driver’s have a lockable retractor
that must be activated to secure a
child seat.
1.
2.
3.
Installing a Child Seat with a Lap/
Shoulder Belt
Installing a Child Seat
44
09/07/02 16:33:28 31SNA640_049
Summary of Contents for 2010 Civic GX
Page 57: ...54 09 07 02 16 35 09 31SNA640_059 I n f o r ma t i o nP r o v i d e db y...
Page 239: ...236 09 07 02 17 07 47 31SNA640_241 I n f o r ma t i o nP r o v i d e db y...
Page 353: ...350 09 07 02 17 27 34 31SNA640_355 I n f o r ma t i o nP r o v i d e db y...
Page 371: ...368 09 07 02 17 30 38 31SNA640_373 I n f o r ma t i o nP r o v i d e db y...
