Follow these precautions whenever
you use the seat heaters:
Use the HI setting only to heat the
seats quickly, because it draws
large amounts of current from the
battery.
If the engine is left idling for an
extended period, do not use the
seat heaters, even on the LO
setting. It can weaken the battery,
causing hard starting.
In the LO setting, the heater runs
continuously. It does not cycle with
temperature changes.
In the HI setting, the heater turns off
when the seat gets warm, and turns
back on after the seat’s temperature
drops.
The ignition switch must be in the
ON (II) position to use seat heaters.
Push the top of the switch, HI, to
rapidly heat up the seat. After the
seat reaches a comfortable
temperature, select LO by pushing
the bottom of the switch. This will
keep the seat warm.
Both front seats are equipped with
seat heaters. The passenger seat is
only heated in the seat bottom
because of the side airbag cutoff
system.
On EX-L model
Seat Heaters
100
Passenger’s Seat
Driver’s Seat
SEAT HEATER SWITCHES
HEATERS
09/07/02 16:43:18 31SNA640_105
Summary of Contents for 2010 Civic GX
Page 57: ...54 09 07 02 16 35 09 31SNA640_059 I n f o r ma t i o nP r o v i d e db y...
Page 239: ...236 09 07 02 17 07 47 31SNA640_241 I n f o r ma t i o nP r o v i d e db y...
Page 353: ...350 09 07 02 17 27 34 31SNA640_355 I n f o r ma t i o nP r o v i d e db y...
Page 371: ...368 09 07 02 17 30 38 31SNA640_373 I n f o r ma t i o nP r o v i d e db y...
