Page
7
of
18
10. Peel the label located inside the inflator box from its backing and attach it to the RO. For the warranty claim to be
paid, the
replacement inflator part number that you received
must be included in the warranty claim.
NOTE:
•
The replacement part number is printed on the top part of the label and the serial number is printed on the
bottom.
Make sure you attach the label to the RO and give it to the warranty clerk
.
•
There may also be a colored sticker located in the kit; ignore it because it is not used.
•
Not all inflator kits have a label included. In those cases, write the serial number and part number from the side
of the inflator box on the RO. The part number always starts with 047.
11. If the replacement inflator (P/N ends with 308) is wrapped with shipping insulation, remove it:
NOTE:
-
Wear disposable gloves and protective glasses. The insulation is not toxic or dangerous, but some people
may be sensitive to the insulation.
-
Dispose of the insulation and wrapping paper to avoid getting the insulation dust/fibers on you or the airbag
assembly.
-
Do not reuse the insulation or wrapping paper. You do not need to wrap the inflator being removed from the
vehicle when it is returned.
•
Cut the wires off from the opposite side from where they are tied (twisted) together.
NOTE: Do not cut the insulation.
