Page
16
of
18
21. Install the new inflator harness.
•
Make sure the airbag and harness are aligned as shown.
NOTE:
-
Make sure you have the orientation correct as shown below
. If you connect the harness incorrectly, the
harness cannot be removed, and you will not be able to reinstall the airbag because the harness will be too
short.
-
On the replacement inflators with plastic collars, connect the red wire connector to the connector with the
red dot.
•
Connect the two connectors. Align the “T” shape in the inflator harness connector with the T-shaped inflator
connector, then press the connector into place.
•
After you hear each connector click, wiggle it to make sure it is secure.
NOTE: If the connector is not properly aligned, it will come out.
