Page
18
of
18
26.
For boxes where the inflator came with shipping insulation (part number ends with 308)
: Remove the cardboard
insert and turn it 90 degrees. Then insert the cardboard into the slots as shown.
NOTE:
•
Do not reuse the shipping insulation.
•
The cardboard insert needs to be adjusted to send back the original inflator otherwise the original inflator
removed from the vehicle will rattle around and may be rejected by the courier.
27. Put the original inflator into the box the new one came in. Make sure there is no other hardware in the box because
if the package rattles, it will not be accepted by the courier.
28. Follow the shipping instructions outlined in PIB A15-0002 to return the undeployed inflator.
29. Give your warranty clerk the RO that includes the replacement inflator serial number and replacement part number.
For the warranty claim to be paid, the
replacement inflator part number
must be included in the warranty claim.
END
