2010 VT1300CX
8
When reinstalling the rear fender, insert the rear fender mudguards
between the engine and swingarm.
Attach the Velcro tape onto the rear fender under the seat.
Attach one of the bags onto the rear fender. This bag will be used to
store personal documents.
Align the front seat hooks with the raised lip of the frame properly.
Reinstall the front seat and socket bolts.
Tighten the socket bolts to the specified torque. Be careful not to
cross-thread the seat bolts.
Reinstall the rear seat.
Attach the rear seat belt.
Temporarily install the rear socket bolt.
Reinstall the 8 x 32 mm socket bolts.
Tighten the rear socket bolt to the specified torque.
Tighten the 8 x 32 mm socket bolts to the specified torque.
Be careful not to damage the rear fender with the seat prong.
OWNER’S MANUAL
Remove the left and right side cover.
Place the Owner’s Manual in the bag and attach it to the inside of
the right side cover.
MUDGUARD
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
TORQUE: 22 N·m (2.2 kgf·m, 16 lbf·ft)
FRONT
SEAT
REAR
SEAT
SOCKET
BOLT
8 x 32mm
SOCKET
BOLTS
REAR
SOCKET
BOLT
COLLAR
SOCKET
BOLT
VELCRO
30 mm
15 mm
PARTS
QTY
Owner’s Manual
1
Bag
1
RIGHT SIDE
COVER
BAG
OWNER'S
MANUAL
