Honda 2001 Accord Sedan Owner'S Manual Download

Page: 41 / 372

Protecting Children

Attach the tether strap hook to the

tether anchorage point and tighten

the strap according to the child seat

maker's instructions.

Using the Lower Anchorages

Your car is equipped with lower

anchorages at the outer rear seats.

These anchorages are located

between the seat-back and seat

bottom and are only to be used with

a child seat designed to attach to the

lower anchorages.

The exact location of each anchor is

marked with a small circle above the

lower anchor point.

To install a child seat designed to

attached to the lower anchorages:

1. Move the seat belt buckle or

center seat belt away from the

anchorages.

2. Make sure there are no foreign

objects around the anchorages.

Foreign objects could get in the

way of a secure connection

between the child seat and the

anchorage.

Driver and Passenger Safety

LOWER ANCHORAGES

Rigid type

Main Menu

Table of Contents

Summary of Contents for 2001 Accord Sedan





















































































































































































































































































































































































Search results

Summary of Contents for 2001 Accord Sedan

Reviews:

Related manuals for 2001 Accord Sedan

Brands by name

Popular brands

Honda 2001 Accord Sedan, Owner'S Manual

Search results

Summary of Contents for 2001 Accord Sedan

Reviews:

Related manuals for 2001 Accord Sedan

Brands by name

Popular brands