Honda 2001 Accord Sedan Owner'S Manual Download

Page: 251 / 372

Transmission Fluid

6. Insert the dipstick all the way back

into the transmission securely as

shown in the illustration.

The transmission should be drained

and refilled with new fluid according

to the time and distance recommen-

dations in the maintenance schedule.

Automatic Transmission

6-cylinder models

Check the fluid level with the engine

at normal operating temperature.

1. Park the car on level ground. Shut

off the engine.

2. Remove the dipstick (yellow loop)

from the transmission and wipe it

with a clean cloth.

3. Insert the dipstick all the way into

the transmission securely as

shown in the illustration.

4. Remove the dipstick and check

the fluid level. It should be

between the upper and lower

marks.

Maintenance

DIPSTICK

UPPER MARK

LOWER MARK

Main Menu

Table of Contents

Summary of Contents for 2001 Accord Sedan





















































































































































































































































































































































































Search results

Summary of Contents for 2001 Accord Sedan

Reviews:

Related manuals for 2001 Accord Sedan

Brands by name

Popular brands

Honda 2001 Accord Sedan, Owner'S Manual

Search results

Summary of Contents for 2001 Accord Sedan

Reviews:

Related manuals for 2001 Accord Sedan

Brands by name

Popular brands