Honda 2001 Accord Sedan Owner'S Manual Download

Page: 106 / 372

Console Compartment, Coin Box

Console Compartment

To open the console compartment,

pull up on the lower lever and lift the

lid.

To close, lower the lid and push it

down until it latches.

You can put small items in the tray

located in the console compartment

lid. To use the tray, pull up on the

upper lever and lift up the armrest

pad.

Coin Box

The coin box is located under the air-

vent. To open the coin box, pull the

bottom edge. Close it with a firm

push.

Instruments and Controls

COIN BOX

CONSOLE COMPARTMENT

LEVER

Main Menu

Table of Contents

Summary of Contents for 2001 Accord Sedan





















































































































































































































































































































































































Search results

Summary of Contents for 2001 Accord Sedan

Reviews:

Related manuals for 2001 Accord Sedan

Brands by name

Popular brands

Honda 2001 Accord Sedan, Owner'S Manual

Search results

Summary of Contents for 2001 Accord Sedan

Reviews:

Related manuals for 2001 Accord Sedan

Brands by name

Popular brands