Honda 2001 Accord Sedan Owner'S Manual Download

Page: 21 / 372

Protecting Adults

Additional Safety Precautions

Two people should never use the

same seat belt.

If they do, they

could be very seriously injured in a

crash.

Do not put any accessories on seat

belts.

Devices intended to improve

occupant comfort or reposition the

shoulder part of a seat belt can

severely compromise the

protective capability of the seat

belt and increase the chance of

serious injury in a crash.

Do not place hard or sharp objects

between yourself and a front

airbag.

Carrying hard or sharp

objects on your lap, or driving with

a pipe or other sharp object in

your mouth, can result in injuries

if your front airbag inflates.

Do not attach or place objects on

the front airbag covers.

Any object

attached to or placed on the covers

marked "SRS AIRBAG" in the

center of the steering wheel and

on top of the dashboard could

interfere with the proper operation

of the airbags. Or, if the airbags

inflate, the objects could be

propelled inside the car and hurt

someone.

On models with side airbags, do

not attach hard objects on or near

a front door.

If a side airbag

inflates, a cup holder or other hard

object attached on or near the

door could be propelled inside the

car and hurt someone.

Keep your hands and arms away

from the airbag covers.

If your

hands or arms are close to the

airbag cover in the center of the

steering wheel or on top of the

dashboard, they could be injured if

the front airbags inflate.

Driver and Passenger Safety

Main Menu

Table of Contents

Summary of Contents for 2001 Accord Sedan





















































































































































































































































































































































































Search results

Summary of Contents for 2001 Accord Sedan

Reviews:

Related manuals for 2001 Accord Sedan

Brands by name

Popular brands

Honda 2001 Accord Sedan, Owner'S Manual

Search results

Summary of Contents for 2001 Accord Sedan

Reviews:

Related manuals for 2001 Accord Sedan

Brands by name

Popular brands