Stereo Sound System (cont'd)
The TMS function lets you skip to the beginning of a song or other
recorded passage. The tape skips forward or backward, depending on
which direction your push the FF/REW/TMS switch. Activate TMS by
pushing the switch and holding it until you hear a beep. If you push the
switch up "FF" blinks in the display as the tape fast forwards. If you push
the switch down, "REW" blinks in the display as the tape rewinds. When
the system senses a silent gap on the tape it goes back to the PLAY mode.
The TMS function may not work properly under the following conditions:
Tapes that contain conversation, lectures, etc.
Classical music tapes or tapes that have many silent or mute
passages.
Tapes that have a short time interval between recorded programs.
Tapes with a high level of noise or hum between programs.
If you do not need the TMS function, push the TMS switch. The indicator
light will go off, and the circuit will not operate.
Fast Forward/Rewind (US: LX, Canada: EX)
Note which Tape Direction Indicator is displayed or Then push
the appropriate button, fast forward (FF) or rewind (REW), to rapidly wind
the tape in play. To stop FF or REW, push the PLAY button.
Play (US: LX, Canada: EX)
Push to resume tape play or to stop the FF or REW operation.
Repeat Button (REPEAT)
Push the REPEAT button (indicator light will come on) to replay the current
selection of music or section of programming. When the end of a
selection of music or section of programming is played, the system
automatically rewinds to the beginning of that passage and resumes play.
The Repeat function will continue until you push the button to turn the
system off.
Summary of Contents for 1993 Accord Wagon
Page 108: ...Maintenance Schedule cont d...
Page 150: ...Specifications cont d page 105...
