9. Use a clean rag to wipe any dirt off the mounting surface of the hub
and the wheel. This will assure a tight, even contact between the
wheel and hub.
10. Install the spare. Install the lug nuts finger tight.
11. Lower the car, remove the jack, then tighten the lug nuts securely in
an "X" pattern as shown.
Tighten the lug nuts to the recommended torque:
80 lb.ft (110 N.m, 11 kg.m).
If a torque wrench was not used, ask an authorized Honda dealer to
verify the torque as soon as possible.
Summary of Contents for 1993 Accord Wagon
Page 108: ...Maintenance Schedule cont d...
Page 150: ...Specifications cont d page 105...
