Honda 1993 Accord Wagon Online Reference Owner'S Manual Download Page 6

Page: 6 / 165

Keys and Locks (cont'd)

Door Plunger

From inside the car, each door and the tailgate can be locked by pushing

the plunger down; each door can be unlocked by pulling the plunger up.

Pushing down the plunger on the driver's door locks all doors and the

tailgate, but pulling up the plunger unlocks only the driver's door.

Pushing down on the tailgate plunger locks the tailgate and all doors. The

plunger on the tailgate is not designed to be pulled up manually for

unlocking.

Power Door Locks

All doors and the tailgate can be simultaneously locked and unlocked by

operating the master door lock switch on the inside of each front door.

Unlock

Lock

Unlock

Lock

Summary of Contents for 1993 Accord Wagon






































































































































































Search results

Summary of Contents for 1993 Accord Wagon

Reviews:

Related manuals for 1993 Accord Wagon

Brands by name

Popular brands

Honda 1993 Accord Wagon, Online Reference Owner'S Manual

Search results

Summary of Contents for 1993 Accord Wagon

Reviews:

Related manuals for 1993 Accord Wagon

Brands by name

Popular brands