Child Safety (cont'd)
Using a Seat Belt Locking Clip
Always use a seat belt locking clip when you secure a child seat to your
car with a lap/shoulder belt. This helps prevent the child seat from shifting
position or overturning.
A locking clip is usually included with the child seat. If you need a clip,
contact the seat's manufacturer or a store that sells child restraints.
To install a locking clip, do the following:
1. Place the child restraint in the desired position. Route the
lap/shoulder belt through the restraint according to the seat
manufacturer's instructions.
2. Insert the latch plate into the buckle. Pull on the shoulder part of the
belt to make sure there is no slack in the lap portion.
3. Tightly grasp the belt near the latch plate. Pinch both parts of the belt
together so they won't slip through the latch plate. Unbuckle the seat
belt.
4. Install the locking clip as shown. Position the clip as close as possible
to the latch plate.
5. Insert the latch plate into the buckle. Push and pull on the child seat
to verify that it is held firmly in place. If it is not, repeat these steps
until the restraint is secure.
Summary of Contents for 1993 Accord Wagon
Page 108: ...Maintenance Schedule cont d...
Page 150: ...Specifications cont d page 105...
