Honda 1991 Prelude Owner'S Manual Download Page 5

Page: 5 / 146

Keys and Locks (cont'd)

Power Door Locks (Si with 4WS or Anti-lock Brake System)

Both doors can be locked or unlocked simultaneously from the
inside using the master door lock switch.

In addition, the passenger door will lock automatically when the lock

tab on the driver's door is pushed forward or the driver's door is

locked with the key.

Keep the trunk lid closed white driving to keep poisonous carbon
monoxide exhaust fumes out of the interior; prolonged exposure

can cause unconsciousness that may lead to death.

Weight limits shown on the label on the edge of the driver's

door must be observed. The total weight of passengers and
cargo must not exceed the total weight limit on the label.

MASTER DOOR LOCK

SWITCH

Trunk

The trunk lid can be opened by pulling up the lever at the outside of
the driver's seat.
To open the trunk lid from the outside, put the master key in the

lock and turn clockwise. The trunk lid opener lever is lockable with

the master key.

MASTER

Pull up

TRUNK LID

OPENER LEVER

MASTER KEY

OPEN

Lock

Unlock

Lock

Unlock

Main Menu

▲

▼

Summary of Contents for 1991 Prelude



















































































































































Search results

Summary of Contents for 1991 Prelude

Reviews:

Related manuals for 1991 Prelude

Brands by name

Popular brands

Honda 1991 Prelude, Owner'S Manual

Search results

Summary of Contents for 1991 Prelude

Reviews:

Related manuals for 1991 Prelude

Brands by name

Popular brands