Honda 1991 Prelude Owner'S Manual Download Page 10

Page: 10 / 146

Trunk Access from Rear Seat

The rear seat-back can be released by turning the lock on the rear
shelf with the master key and pulling down with the strap at the top

of the seat-back. This allows passenger access to the trunk and

makes it possible to carry long objects inside the car.

The rear seat-back can also be released from inside the trunk by

pulling the release.

Passengers or pets must not sit on the folded portion of the rear

seat.

Make sure any luggage or cargo within the trunk, or extending

through the rear seat trunk access is secured.

Make sure the seat-back latches engage securely when the
seat-back is returned to its normal position.

When closing the rear seat trunk access, push the seat-back firmly

into place, then pull on the strap to make sure it is secure.

CAUTION:

Make sure both rear shoulder belts are positioned In front of the
rear seat-backs whenever the seat-backs are in their upright

position.

RELEASE

STRAP

MASTER KEY

Open

Main Menu

▲

▼

Summary of Contents for 1991 Prelude



















































































































































Search results

Summary of Contents for 1991 Prelude

Reviews:

Related manuals for 1991 Prelude

Brands by name

Popular brands

Honda 1991 Prelude, Owner'S Manual

Search results

Summary of Contents for 1991 Prelude

Reviews:

Related manuals for 1991 Prelude

Brands by name

Popular brands