Stereo Sound System (cont'd)
Preset Station
1. Make sure the Band Selector is on the band you want. . . AM or
FM. Then, find the station you want by Manual Tuning or Seek
Tuning.
2. Press and hold one of the Preset Buttons.
3. In a few seconds, a beep will sound and the light in the button will
come on. The station is now preset in the memory. You may preset
1 AM and 1 FM station per button (total, 6 of each on the LX model
and 8 of each on the EX or EX-R model).
4. You can tune to a preset station by pushing its corresponding
preset button.
NOTE: On the EX or EX-R model, the Auto Select Button must be off
before the Preset Station Selection can be used.
Auto Select Button (EX or EX-R only)
If you are visiting a new broadcast area, you can quickly enter into
memory the stronger stations in that area by simply pushing the Auto
Select Button. The radio will then scan one band at a time, AM or FM,
and temporarily memorize up to eight stations in the band selected.
With the Auto Select Button on, the stations in memory can then be
tuned to by pushing the preset buttons. If the band is changed and
Auto Select on, the Auto Select feature will cancel.
Manually-preset stations remain memorized for use when you return
to your normal broadcast area, but are only selectable with the Auto
Select Button off.
Stereo Indicator
This lights up when an FM stereo broadcast is being received. It w i l l
flash when the signal strength diminishes. If it flashes, good stereo
reception cannot be expected. Stereo reception is available only for FM
stereo broadcasts, not for AM stereo broadcasts.
Summary of Contents for 1991 Accord Wagon
Page 90: ...Maintenance Schedule cont d...
Page 131: ...page 105...
