Honda 1991 Accord Wagon Owner'S Manual Download Page 48

Page: 48 / 148

Heating and Cooling

The vents, heater and air conditioner are combined in one system;

adjusting four basic controls to different settings can provide a full

range of interior temperatures for safe and comfortable driving.

Ventilation

The flow-through ventilation system provides fresh air to the interior
when the car is moving even with the windows closed. When the car
is stopped, turn on the fan to draw outside air into the car.

NOTE: For proper air flow, the flow-through vents must not be

covered. Keep the air inlet at the base of the windshield free of leaves

or other debris.

Adjust the panel controls to direct cool or warm outside air

throughout the car.

AIR INLET

AIR OUTLET

Summary of Contents for 1991 Accord Wagon





















































































































































Search results

Summary of Contents for 1991 Accord Wagon

Reviews:

Related manuals for 1991 Accord Wagon

Brands by name

Popular brands

Honda 1991 Accord Wagon, Owner'S Manual

Search results

Summary of Contents for 1991 Accord Wagon

Reviews:

Related manuals for 1991 Accord Wagon

Brands by name

Popular brands