Cruise Control
To Change the Set Speed:
To a faster speed - for gradual
acceleration with your foot off the
accelerator, push and hold the
RESUME switch until you reach the
desired speed; release the switch and
the system's memory will be
re-programmed to the new speed. For
faster acceleration, push the
accelerator until you reach the
desired speed, then push and release
the SET switch to re-program the
system.
To a slower speed - push and hold the SET switch and the car will
coast; when you reach the desired slower speed, release the switch
and the system will be re-programmed.
For temporary acceleration above the set speed, such as for passing,
use the accelerator pedal conventionally. When you want to return to
the set speed, take your foot off the accelerator and coast without
applying the brakes.
To Cancel the Cruise Control:
Simply push the CRUISE CONTROL master switch and the indicator
light will go off (this also erases the memory of the set speed).
If you must temporarily disengage the system (but wish to retain the
memory of the set speed): tap the brake pedal, or the clutch pedal (5
speed transmission). If you are still going above 25 mph (40 km/h), you
can return to the set speed by simply pushing the RESUME switch. If
the car has decelerated below approximately 25 mph (40 km/h), you
can return to the set speed by using the accelerator conventionally
until the speed is above 25 mph (40 km/h) and then pushing the
RESUME switch.
SET
RESUME
Push
Summary of Contents for 1991 Accord Wagon
Page 90: ...Maintenance Schedule cont d...
Page 131: ...page 105...
