© 2002 American Honda Motor Co., Inc. - All Rights Reserved.
7
Insert the ignition key.
Observe that the system beeps
twice.
The switching procedure is
The result
AUTOMATIC MODE
Not completed
No beep
MANUAL MODE
Completed
Beep twice
System Controls
Turn the ignition key from the ON (II) position to the LOCK (0) position.
Remove the key from the ignition switch.
Arming Mode
(AUTOMATIC MANUAL)
This section explains how to change the arming mode from AUTOMATIC to MANUAL.
Open a door and close it. (The EXIT delay starts.)
NOTE: Steps 3 thru 7 must be completed within 5 seconds.
Insert the ignition key.
Remove the ignition key from the ignition switch. (All the way out)
Insert the ignition key.
Remove the ignition key from the ignition switch. (All the way out)
1
2
3
4
5
6
7
0
0
0
0
0
0
LOCK
ON
within 5 seconds