© 2002 American Honda Motor Co., Inc. - All Rights Reserved.
11
Arming
Arming Methods
There are two possible ways to arm the system:
• MANUAL Arming (Remote Control)
• AUTOMATIC Arming (Passive)
Manual Arming
(Remote Controlled)
1
Make sure the arming mode is set to
MANUAL.
Turn the ignition key to the LOCK (0) position.
Remove the key from the ignition switch.
Exit the vehicle, then close all the doors, the
trunk, and the hood
*
1
.
Press the LOCK button on the remote control
transmitter. Observe that:
• The remote control LED illuminates.
• The security system arms.
• The status LED flashes once per 3
seconds. (Be sure to check the status LED
flashes.)
• The parking lights flash once. (Be sure to
check that the lights flash.)
• The doors lock
*
2
.
If the LOCK button is pressed a second time
(within 5 seconds of the first push) the horn
beeps once to confirm the doors are locked
*
2
and the system is armed.
2
3
0
3
3
M
*
1
Only on the vehicles equipped with optional hood switch.
*
2
Only on the vehicles equipped with power door locks.
• When the main unit is set to MANUAL, the system is armed by using the remote
control transmitter. This is the factory setting.
• The system beeps three times, and does not arm if the trunk, any door, or the
hood
*
1
is not closed when the LOCK button is pressed.
or
