139
Audio System
Audio System Theft Protection
Au
d
io
Audio System Theft Protection
The audio system is disabled when it is disconnected from the power source, such as
when the battery is disconnected or goes dead.
1.
Set the power mode to ON, and turn on the audio system.
If you set the power mode to ACCESSORY, you will be requested to enter the
audio security code. See step 3.
2.
Press and hold the audio system power button again for more than two seconds.
The audio system is reactivated when the system’s control unit recognizes that
the system is in your vehicle.
If the control unit fails to recognize, ”
Enter PIN Code
“ appears on the
navigation screen.
3.
Enter the audio security code using the touchscreen.
If you enter an incorrect digit, continue to the last digit, then try again.
If you do not enter code correctly after 10 tries, leave the system for one hour
before trying again, or visit a dealer to have the system reset.
1
Audio System Theft Protection
Find the audio system’s security code and serial
number label in your owner’s manual kit.
We recommend that you write down the serial
number, but not the security code, in this
owner’s manual.
Do not store the label in your vehicle. If you lose
the label, you must first retrieve the serial
number, and then obtain the code.
You can find out about your serial number and
security code from a dealer.
U.S. Only
You can register the security code at Honda
Owners (
owners.honda.com.
), and find
information on how to retrieve the serial number
and obtain the code at
radio-
navicode.honda.com
.
