Check bathroom space
Preparation Before Installation
Before installation
：
1.Turn off the ceramic water supply system.
2.Press the ceramic flush button to release
the pressure from the water supply pipe.
3.Place a container under the T-valve to hold
excess water.
4.Close the T-valve to stop water supply.
All outline drawings of the ceramic body in
this manual are for reference only.
As shown below: Please make sure there is enough space in the bathroom.
CAUTION
PROHIBITED
Be sure to use the mounting plate delivered with this package.
Do not use the product if the main unit is unstable.
● Doing so may cause the main unit to come loose and fall, resulting in injury.
How to mount the plate
How to install the main unit
Mounting bolts and nuts
、
Adjust slide
、
Bolt guides
Mounting plate
Ceramic mounting holes
Ceramic body
1.Install the expansion rubber plug
into the ceramic mounting hole.
2.Place the Mounting plate above
the mounting hole of the ceramic.
3.Mounting bolts and nuts into the
bolt guides and adjust slide.
4.Use mounting bolts and nuts to
lock the adjust slide and the bolt
guides to the mounting plate.
Mounting
plate
1.Align the bottom of the main unit to the
direction of the mounting the plate.
2.Push in the direction of the arrow.
When you hear a click, it means
installation is complete.
3.Pull it slightly towards you to make
sure the product will not loosen after
installation.
TIPS
：
Tips for mounting plate installation:
First install the mounting plate IN A
LOOSE WAY, install the main unit,
adjust the position, then press the
push rod to remove the unit, lock
the mounting plate firmly. Then you
are done.
Expansion
rubber plug
11
HOW TO INSTALL
12
HOW TO INSTALL
USER MANUAL
USER MANUAL
Unit:mm/Inch
7.63"(195mm)
20.38"(517mm)
7.63"(195mm)
