background image

SAFETY PRECAUTIONS

SAFETY PRECAUTIONS

● This product must be connected to the cold water supply (the 

inlet water temperature is 

about 41-95

(5~35

)), otherwise it may cause burns or machine failure

● When an abnormality or failure occurs, always unplug the plug

 from the outlet and close 

the T-valve to stop water supply.

Continued use after malfunction could cause a fire, electric shock, heat,  short circuit, injury

or water damage.

WARNING

Possible malfunctions:

-The product is cracked or broken.

-The product emits smoke.

-The product makes a strange noise or emits a strange odor.

-The product is abnormally hot.

-Water is leaking from a pipe or the main unit.

Check if the power outlet is grounded

This product must be well grounded. Only 

connect to the dedicated 120V~60Hz, 10A 

circuit with ground fault circuit breaker or 

ground leakage protector.

Doing so may cause fire or excessive heat.

Doing so may cause electrical shock.

Doing so may cause fire, electrical shock, heat 

or short circuit.

Doing so may cause the product to crack 

resulting in injury or water damage.

May cause fire, electrical shock

Do not use too many appliances 

on one power strip.

Remove the plug and clean it with a dry cloth.

Ground Connection

COMPULSORY

After removing the dust from the plug, be 

sure to insert the leakage protection plug 

firmly into the socket.

Do not use any power supply other than 

the one specified.

AC 120V,60Hz

Do not plug or unplug the power plug 

with wet hands.

Do not get any water or cleaning solution 

on the main unit or power plug.

Do not use a loose or faulty electrical outlet.

PROHIBITED

PROHIBITED

Do not spray 

water

Do not handle 

with wet hands

03

04

USER MANUAL

USER MANUAL

DANGER

To reduce the risk of electrocution:

1. Do not use while bathing.

2. Do not place or store the product where it can fall or be pulled into a tub or sink.

3. Do not place in or drop into water or other liquid.

4. Do not reach for the product when it has fallen into water. Unplug it immediately.

WARNING

To reduce the risk of burns, electrocution, fire 

or injury to persons:

1. Close supervision is necessary when this product is used by, on, or near children

    or invalids.

2. Use this product only for its intended use as described in this manual. Do not use 

    attachments not recommended by the manufacturer.

3. Never operate this product if it has a damaged cord or plug, is not working 

    properly, has been dropped or damaged, or has been dropped in water. Return 

    the product to a service center for examination and repair.

4. Keep the cord away from heated surfaces.

5. Never block the air openings on the product or place it on a soft surface, such as 

    a bed or couch, where the air openings may be blocked. Keep the air openings 

    free of lint, hair, and other similar items.

6. Never use while sleepy or drowsy.

7. Never drop or insert any object into any opening or hose.

8. Do not use outdoors. Do not operate where aerosol (spray) products are being 

    used or where oxygen is being administered.

9. Connect this product to a properly grounded outlet only.

This product should be grounded. In the event of an electrical short circuit, grounding 

reduces the risk of electric shock by providing an escape wire for the electrical current.

The plug must be plugged into an outlet that is properly installed and grounded.

Safety Precautions

Grounding Instructions

 (Continued)

        DANGER - Improper use of the grounding plug can result in a risk of electric 

shock. If repair or replacement of the cord or plug is necessary, do not connect the 

grounding wire to either flat-head terminal.The wire with insulation have an outer 

surface that is green with or without yellow stripes is the grounding wire.

Check with a qualified electrician or serviceman if the grounding wire instructions are 

not completely understood, or if in doubt as to whether the product is properly grounded.

This product is factory equipped with a specific electric cord and plug to permit 

connection to a proper electric circuit. Make sure that the product is connected to an 

outlet having the same configuration as the plug.

No adapter should be used with this product. Do not modify 

the plug provided - if it will not fit in the outlet, have the 

proper outlet installed by a qualified electrician.

If the product must be reconnected for use on a different type 

of electric circuit, the reconnection should be made by qualifi 

ed service personnel.

If it is necessary to use an extension cord, use only a three 

wire extension cord that 

has a three blade grounding plug, and a three-slot receptacle 

outlet that will accept the plug on the product.

Replace or repair a damaged cord.

Save these instructions.

Grounding pin

SAVE THESE INSTRUCTIONS

Summary of Contents for DS-0988















Reviews: