USER'S MANUAL
USER'S MANUAL
STOP
REDUCED WATER PRESSURE
INCREASED WATER PRESSURE
● When cleaning, press this key to stop the cleaning function.
● Short press this button, water pressure, nozzle position, water and seat temperature are same with
previous setting.
● Long press to activate standby mode when power on.
● Press this key to reduce spray pressure in rear wash and front wash.
There are 4 levels in total. Each press reduces the cleaning intensity by 1 level.
● Press this key to increase spray pressure in rear wash and front wash.
There are 4 levels in total. Each press increases the cleaning intensity by 1 level.
● Press this key to adjust the seat temperature. The seat temperature is adjustable in 4 levels.
When the LED is off, the seat temperature is the room temperature.
According to the use environment, the actual seat temperature is about 86
~
105.8
℉
(30
℃~
41
℃
)
● When the human body is seated, the anti-low temperature burn function is automatically turned on
after 15 minutes, and the seat temperature is reduced to level 1.
During the cleaning process, press this button to start Cold & Hot SPA; press it again to stop Cold &
Hot SPA, and at the same time the temperature returns to the normal cleaning state.
5 seconds cold water and 15 seconds set hot water alternate.
SEAT TEMP
COLD & HOT SPA
During the cleaning process, short press this key to start the massage wash, short press this key again
to stop the massage wash, and the water potential returns to the normal cleaning state. The strength of
the strong and weak massage and the cleaning intensity are cyclically changed from high to low to high.
MASSAGE WASH
WATER PRESSURE
WATER PRESSURE
Function Description
Seating detection
There is a seat detection switch on the seat ring, which is used to detect whether there is a person
seated. After the human body is seated, it can run the rear wash and front wash functions; when the
rear wash and front wash functions are turned on,the human body leaves the seat, and the above
functions are automatically turned off.
Manual cleaning
In the state of leaving the seat, long press the nozzle forward key.
The nozzle extends out for manual clean with a toothbrush. When finish,press "Stop" button to
withdraw the nozzle.
Nozzle will also retracts automatically after 3 minutes of cleaning.
Nozzle self-cleaning
Nozzle will be washed automatically before and after each use.
Portable disassembly
Seat tempt ECO
The main unit can be disassembled for easy cleaning and maintenance.
Long press the remote seat temperature button for 3 seconds to turn on/off the seat tempt ECO mode.
In the ECO mode, the side LED shows green, and the seat temperature drops to level 1 when the
seat is off.
19
20
USER MANUAL
USER MANUAL
