HOMMY ENTERPRISE (XINHUI) CO., LTD.
3 - 32
INSTALLATION NOTES
To ensure the safety of the operator, ice cream machine the external power supply leakage protection
device must be installed.
The machine indoor installation, please do not use water spray or damp place installation of ice
cream machine, otherwise it will result in severe shock.
●
Air-cooled machine
All the machines must maintain at least 50 cm gap.
This will make the air flowing through the
condenser enough. If there is not enough space, permanent damage to the refrigerating capacity will
reduce the ice cream machine and may cause the compressor
●
Electrical connections
To install each ice cream machine according to the requirements of the rated power, current and voltage on
the nameplate label electrical specifications.
Caution: This machine must be properly grounded! Otherwise it will cause an electric shock and
causing serious bodily harm!
If look into the freezing cylinder,
the stirring shaft must rotate in a clockwise direction.
Note: To perform the following steps by trained repair technicians.
SAFETY MEASURES
Important note: not strictly abide by the safety regulations may result in heavy casualties.
Failure to comply with this warning will damage the machine and parts. Component damage will increase
the replacement of parts and service repair expenditure.
Safe operation:
