HOMMY ENTERPRISE (XINHUI) CO., LTD.
12 - 32
Step 2: Pry out the Fixing seat and locating sleeve form the stirring shaft
Step 3: Pry out the two sealing gaskets from the throat block.
Step 4: Remove the star-cover.
Step 5: Screw out the sealing nut from the cross bar in counterclockwise.
Step 6: Pull out the cross bar from the throat block, and pull out the handles and the plugs.
Step 7: Pull out the plug and the handle from throat block.
Step 8: Take away the sealing ring from plug.
Note: After cleaning and re-install, don’t forget to coat a little lube on the
positions of the sealing rings and the sealing gaskets
Install stirring shaft.
(a: transmission shaft; b: Sealing gasket; c: plastic sleeve)
1-1
）
Before installing stirring shat, firstly coat a little lube on the surface of the transmission
shaft, the sealing gasket and the plastic sleeve.
1-2
）
Insert the sealing gasket and the plastic sleeve to the transmission shaft.
Note: In installation, the bulge side of the plastic sleeve must be toward the transmission shaft.
1-3
）
Insert the transmission shaft into the coupling. In installation, slightly turn left and right the
transmission shaft, aim at the hole of the coupling, insert the shaft end into the coupling.
Note: If the transmission shaft is correctly inserted into the coupling, you will feel the rebound
efforts.
